ALL
SOLD / ARCHIVE ITEMS ON THIS PAGE |
NEW LISTING 8/2/05
(click on above thumbnails to enlarge photos)
ORIGINAL
ACOUSTIC 360 / 361 BASS AMPLIFIER / SPEAKER
COMBO
SOLD 9/13/05
Circa 1968 to early '70's.
for sale
One of the 2 or 3 most sought after bass guitar amplifiers, The Acoustic 360
/ 361 rig. This thing ROCKS! I see why everyone is so hot on it. I have been
a dealer for most of the great bass amp companies over the years, Trace
Elliot, Peavey, Fender, Roland, Yamaha, Ampeg, SWR and many I've forgotten
and this is in the top 3-4 best performing bass amp combos, I've auditioned.
Huge volume that "hold together". The folded horn design of the
speaker cab, I think is the secret. It really develops huge, pounding bass
about 35 feet out front (watch out if you're unfortunate enough to be
sitting in the 3rd or 4th row listening to this thing). One of the coolest
features about this amp is the "Variamp" EQ preset control. Easily allows an
almost infinite variety of useable tones. Of course there's the famous
"FUZZ"! Can you say Sly and the Family Stone? There's also the silly "Tuning
Fork" feature. Other than the original Tolex / vinyl covering being stripped
from the speaker cabinet and it then being painted black, it's all there. We
have done a couple of minor mods on it. Since the original, 18" Cerwin Vega
internal speaker is already 4 ohms, and there's no power switch for the
internal 361 power amp, we removed the "Output" / Extension speaker jack and
installed a heavy duty AC power switch for the amplifier. We also upgraded
the internal 18g "zip wire" speaker wire to 12 gauge / 256 strand, oxygen
free "Monster" brand speaker cable. We also added an inline fuse holder to
protect the speaker, currently loaded with a 4 amp fuse. We have completely
gone through the Head / Pre-amp, cleaning the entire unit inside and out,
including all the switches and control pots. All I/O jacks cleaned and
tightened. We installed a new AC cord and grommet on the back of the speaker
cabinet and both AC cords are 3-prong, grounded. The Cabinet has been
disassembled for the installation of the Monster Cable to the Original
Cerwin Vega #0188, Cast frame, 18" speaker. The Tolex on the head is in
great shape and we touched up the flat black finish on the cab. Both cab
handles and tilt-back wheels intact and work fine. The Pre-Amp head has 4
line-level outputs for driving other amps in addition to this one. It also
features a jack for a foot switch (not included). All knobs and hardware is
original! Again this is a great performer. We powered it up and left it on
for 4-6 hours at a time, quite a few times, included a lot of play time,
after we did the refurb work. It's ready to go!
Head measures 24.5" w
x 6.5" tall x 12" deep
and weighs 20 lbs unpacked. The
cabinet measures 49" tall x 24.5" w x 18" deep and weighs 143 lbs unpacked.
Overall Cond. 8
SOLD 9/13/05
(Photo editing by Camerion P. Gholson)
|
(click on above thumbnails to enlarge photos)
warranty
ACOUSTIC BRAND
ELECTRIC GUITAR AMP
MODEL G20-110
SOLD 3/06
Vintage
Acoustic G20-110 guitar amplifier. Chassis model 105. Good solid state rehearsal
/ practice / small gig guitar amp. Features 2 inputs, Hi-Lo selector,
Pre-gain, 3-Band EQ, Spring Reverb and Master volume. 20 watts with a
10" speaker. We have completely gone through it cleaning and testing
all. All pots and controls cleaned and internal solder joints checked for
integrity. Amp works, looks and sounds great. Measures 16" high x
13.5" wide x 9.5" deep and weighs 27 lbs unpacked. Includes our
standard 90 day limited warranty.
Acoustic G20-110
Cond. 8.5+
SOLD 3/06
|
- |
AMPEG VT-40 TUBE GUITAR AMPLFIER
Circa '71-'72
SOLD
|
NEW ADDITION
6/21/05
(Click on the above
thumbnails to enlarge photos)
AMPEG
"VT-60"?
VT60
SOLD 12/05
AMPLIFIER
CABINET
FOR SALE
A Vintage Ampeg VT-60? amplifier cabinet! 1x 12"
combo. No speaker or chassis. Includes reverb tank in un-known condition.
Covered in black Tolex. Speaker grill is blue-gray weave and includes
original logo. Likely late '60's to early '70's. Cosmetically in decent
condition. No breaks to cabinet. Handle intact as are the corners and back
plates. Measures
20 ½” tall x 18 ½” wide
x 10 ½” deep
and weighs 21 lbs
unpacked.
Ampeg VT-60?
Cond. 7.5 cosmetically
(Cabinet only)
SOLD 12/05 |
|
AMPEX
MODEL 620
SOLD |
- |
ORIGINAL CRATE GUITAR AMPLIFIER CR-1
CIRCA 1978
ORIGINAL "CRATE" AMP
THAT LOOKS LIKE A WOODEN CRATE
SOLD
|
1947
DICKERSON TUBE GUITAR AMPLIFIER
'MOTHER OF TOILET SEAT'
SOLD |
|
|
Front photos
Rear photos & Bench photos
(click on above thumbnails to enlarge
photos)
ORIGINAL VINTAGE
FENDER
"BLACK-FACE"
SUPER REVERB
Circuit Model AB-763
4x10"
ALL TUBE
GUITAR AMPLIFIER AMP
SOLD 12/6/03
One of the most sought after of all Fender tube guitar amps. Can
you say S.R.V.?! This is not only one of the cleanest used amps I have ever
sold (and I have sold hundreds over the past 20 years), but it's one of the
cleanest "vintage" amps I've seen! It's also about the second best amp I've
ever played (the first best was my '55 Fender Tweed Bassman that sold for
$4,500.00). It's got the serious TEXAS tone. This is an original 1967 and
not a re-issue. Features all tube construction and the sought after
point-to-point / oil-board internal wiring & construction. We have
completely gone through it, checking all filter caps and the other
electrolytics, checking all tubes and replacing where necessary. Tubes are
all old-stock USA models with the exception of the rectifier tube - 5AR4/
GZ-34 which is a much sought after British Made Mullard. No Asian tubes in
this amp! All control pots have been cleaned and all functions tested. Again
all tubes are US made and are as follows: 5AR4 / GZ-34 Mullard tube
rectifier, Dual RCA 6L6GC outputs, an RCA 12AX7/ECC-83, 3X RCA 7025's and 2
JAN / Philips 12AT7WC's. The 4x10" original Fender speakers are in perfect
shape with no buzzes or other "wrong" noises. Other features include foot
switch-able Reverb & Vibrato and original dual button Fender footswitch is
included, External Speaker output, Ground reversal switch and AC outlet.
Both original back panels still intact and in NEW condition. Front of amp
has original grill cloth, control panel and knobs. All in good shape with
hardly any wear. Amp is covered in the original black Tolex which is also in
great shape with only the most minor wear. We also installed a grounded
(3-prong) AC cord for safety (original AC cord will be included). All four
casters and both original chrome Tilt-Back legs intact. The amp works
perfectly and sounds INCREDIBLE!!!!! Has that incredible "wall-o-sound" with
a clear bell tone until you stand on it, especially with humbuckers and then
it bites. Will start to get nice feedback around 5-6 on my Strat with
Seymour Duncan Hot Rails in the bridge. Super SRV tones in the 2nd thru 5th
pick-up positions. With my '70 Les Paul Custom T-Top pick-ups it has fat
gain at higher volumes. With my Tele it's OH MY GOD!!! Input still low
enough that pedals sound great in the front end. Full size spring reverb
tank sounds great! From it's "Like New" condition, it's obvious this amp has
not been "gigged" with. Doesn't even smell like smoke. THIS AIN'T NO EB_Y
AUCTION QUALITY AMP, DRAGGED OUT OF THE BASEMENT WITH A COUPLE OF PHOTOS
SNAPPED, JUST TO "SEE WHAT SHE'LL BRING". It's ready to go with NO EXCUSES.
Not cheap, but worth more than every penny! We have gone over it completely
spending about 14 hours in its testing / check-out / refurb. Measures 25"
wide x 27.5" high x 11" deep and weighs 63 lbs unpacked.
1967 Fender
Blackface
Super Reverb
Cond 8.5+++
SOLD 12/6/03
Guitars used for testing are as follows:
>'73'ish Strat with Bridge: Seymour Duncan "Hot Rails"
Neck / Middle: Seymour Duncan "Stacked Strat"
>'71 Les Paul Custom with Stock coverless T-Top Humbucker
>Custom Made Tele with Seymour Duncan '50 Broadcaster P-Up in Bridge and
Stew Mac Standard Tele P-Up in neck position.
|
FENDER "BLACKFACE" PRO-REVERB GUITAR
AMPLFIER
WITH ALTECS!
ORIGINAL '67! VERY CLEAN.
SOLD |
ORIGINAL 1955 FENDER BASSMAN AMPLIFIER
THIS WAS THE 'REAL DEAL' AND BOY DO I WISH I HAD IT BACK!
Original tweed finish, oxblood grill, and original Jensen P10R 'Blue Bell'
speakers. Only thing that had been changed was the fuse holder and the tweed
panel that covers the circuit board. AMAZING SOUND!
SOLD |
FENDER "CHAMP" TUBE GUITAR AMPLIFIER
1965 TRANSITION BLACK-FACE MODEL.
SOLD
|
1961 FENDER 'TREMOLUX' TUBE GUITAR AMP
& 212 SPEAKER CAB.
SOLD |
PRE-CBS FENDER VIBROLUX TUBE
GUITAR AMP
SOLD |
ORIGINAL '65 FENDER PRINCTON REVERB TUBE GUITAR
AMP. NOT A REISSUE!
SOLD |
(click on above thumbnails to enlarge photos)
VINTAGE FENDER "SILVER-FACE" PRINCETON REVERB TUBE
GUITAR AMPLIFIER
AMP
SOLD 12/5/05
One of the classic all tube combo guitar amps. These are great amps
for guitar or harmonica! Part of the inside tube chart sticker is missing on
the inside of the cabinet, so we aren't able to define it's year, but is
likely early to mid 70's. Features all tube construction and the sought
after point-to-point / oil-board internal wiring & construction. We have
completely gone through it, checking all filter caps, checking all tubes and
replacing where necessary. All control pots have been cleaned and all
functions tested. All tubes are US made and are as follows: 5U4GB tube
rectifier, Dual RCA 6V6 outputs, Dual 12AX7, A 12AT7 and a 7025. The 16 ohm
10" speaker is in great shape and appears to be original. Other features
include foot switch-able Reverb & Vibrato, External Speaker output, Ground
reversal switch and AC outlet. Both original back panels still intact. Front
of amp has original grill cloth, control panel and knobs. All in good shape
with only very minor wear to plate. Amp is covered in the original black
Tolex which is also in great shape with only the most minor wear. Also
includes the original grounded (3-prong) AC cord installed from the factory.
The amp works and sounds great. Will stay clean up to about 7 or 8 then it
starts to bite. With higher output pick-ups it has a good amount of gain.
Full size spring reverb tank sounds great! Measures 20" wide x 16.5" high x
9" deep and weighs 32 lbs unpacked.
Fender
Princeton Reverb
Cond 8.5
(C)
SOLD 12/5/05
|
(click on above thumbnails to enlarge photos)
VINTAGE FENDER "SILVER-FACE" VIBRO-CHAMP ALL TUBE GUITAR AMPLIFIER
#A-49024
Circa 1970's
SOLD 9/27/06
One of the classic all tube combo
guitar amps. These are great amps for guitar or harmonica! We have had this
amp for a couple of years and just now got around to it's restoration. The
inside tube chart sticker is missing on the inside of the cabinet, so we
aren't able to define it's year, but is likely early to 1970's. Features all
tube construction and the sought after point-to-point / oil-board internal
wiring & construction. We have completely gone through it, checking all
filter caps, checking all tubes and replacing where necessary. All control
pots have been cleaned and all functions tested. We installed a new Fender
Handle, new Fender amp straps, new Fender knobs and a new pilot lamp. We
checked all the internal solder joints for integrity. All tubes are US made
or British and are as follows: GE 5Y3GT tube rectifier, British Raytheon
6V6G output tube & Dual USA RCA 12AX7's for the Pre-amp and tremolo. The 4
ohm 8" speaker is in great shape. Other features include foot switch-able
Reverb & Vibrato (foot switch not included) Both original back panels still
intact. Front of amp has original grill cloth, control panel and knobs. All
in good shape, but a lot of scuffing to the face plate. Amp is covered in
the original black Tolex which is also in great shape with only the most
minor wear to one corner. Also includes the original grounded (3-prong) AC
cord installed from the factory. The amp looks beautiful, works and sounds
great. We have had a lot of these over the years and this one has great
"bite" starting around 4 on the volume with hum-buckers. About 5 with
singles. With higher output pick-ups it has great gain. This amp was
originally sold by Quigley Music in Kansas City, Mo. Measures 16.75" wide x
14.25" high x 7" deep and weighs 19 lbs unpacked.
Fender
VIBRO-CHAMP
Cond 8+
SOLD 9/27/06
|
(click on above thumbnails to enlarge photos)
6 ORIGINAL VINTAGE
NOT-NEW OR RE-ISSUE!
FENDER CHAMP OR VIBRO-CHAMP KNOBS
Circa 1960's-80's
These are original, vintage & old Fender
Champ or Vibro-Champ guitar amp knobs. They will also fit almost all other
Fender amps from that era, such as Band Master, Bassman, Deluxe, Tremolux,
Reverb Amp / Unit, Twin-Reverb, Super Reverb, etc. Just about any
"black-face". They are used originals, with normal wear. Still have the set
screws intact.
SOLD 8/22/05 |
GALLIEN KRUEGER / GK
250ML II / 250 ML GUITAR AMP
TINY, but HUGE!!!
SOLD
These are the most famous smallest BIG guitar amp ever made. The Gallien-Krueger
model 250ML. These amps consistently get user ratings of 8's, 9's and
mostly solid 10's by user groups and most players. They are
unbelievable, but had a new price tag that was appropriate to their
performance (MSRP $800 base price). Very durable, all metal 14 gauge
construction and assembled like a "brick _ _ _ _ house"! All pots,
controls and jacks are high quality and have shaft nuts attaching them
to the chassis, not just soldered and stuck through the face like almost
all modern gear unfortunately is built. Dual channels with Built-in
Compression and gain on channel 1 and Huge gain on channel 2. The amp
also has a 4-band EQ with centers at 120Hz, 500Hz, 2KHz and 8KHz. There
is also a built-in ECHO effect and a Lush Chorus. Listen to some of the
old RUSH recordings during the "Moving Pictures" era to hear what the
amp can do. Does it live also either by using the dual 6.5" stereo
speakers or by using with one or two 16 ohm, 4 x 12 cabinets such as
Marshall or Mesa Boogie. The amp is true stereo and each of the power
amps produce a loud 50 watts for 100 watts total. All this in a package
not much bigger than a shoe-box!!! (does weigh a lot more than most
boxes of shoes though) This is a performance amp, not a practice amp,
although it makes a great portable amp as well. There's also a front
mounted 1/4" headphone output. Now for the back. It sports a 1/4" stereo
AUX / Line / CD input, 1/4" effect send and return jacks, dual 16 ohm
external speaker output jacks and an XLR direct line-output. This one
has had a technician install a speaker defeat switch on the rear of the
amp to turn off the internal speakers when using external cabinets if
you don't want them hot at the same time. This amp is internally
designed very well and is "tech friendly". The built-in speakers are
perfect with no rattles or buzzes and get REAL LOUD. They are each 16
ohms. If you are very careful and are paying attention your external
speakers can also be 8 ohms, but you must remember to defeat the
internal speakers prior to connecting them. We have completely gone
through it cleaning all the pots and contacts. It works and sounds
great! Still looks pretty good with normal wear to finish. Measures
13.75" wide x 7.25" deep x 9.5" tall and weighs 17 lbs unpacked. Comes
with a copy of the users manual and AC cord. Includes our standard 90
day limited warranty (excluding speakers which are guaranteed to work at
time of delivery).
GK 250ML
Cond. 7.5
SOLD
|
|
1939 GIBSON EH-150 TWEED / TUBE GUITAR
/ LAP STEEL AMPLIFIER
SOLD |
'39 GIBSON EH185 TWEED / TUBE GUITAR /
LAP STEEL AMPLIFIER
SOLD |
ORIGINAL / VINTAGE 1960'S GIBSON GA-5T
"SKYLARK" TUBE GUITAR AMPLIFIER
SOLD |
VINTAGE 1960'S GIBSON GA-75
"RECORDING MODEL" TUBE GUITAR AMPLIFIER
SOLD |
ORIGINAL GRETSCH ELECTROMATIC TWIN TUBE
GUITAR AMP
SOLD |
VINTAGE GRETSCH
ELECTRO-MATIC TWIN TUBE GUITAR AMP
SOLD |
1950'S HARMONY TUBE GUITAR AMPIFIER
SOLD |
|
|
ORIGINAL JBL D120F 12" SPEAKERS.
Gray frame, AlNiCo magnet, Orange label.
SOLD
|
|
|
PAIR ORIGINAL VINTAGE
1965
JENSEN
10" SPEAKERS
P-10R AlNiCo
SOLD
FOR SALE
Original AlNiCo Magnet Jensen 10"-8 ohm
speakers, series P-10R date code 220516 (16th week of 1955) and 220515 (15
week of 1955). They look and sound fine. Both passed our audio
generator sweep test and are ready to install.
1" voice coils. 8 ohms.
Jensen P-10R Silver P10R
Cond. 8
SOLD |
PAIR ORIGINAL VINTAGE
1958
JENSEN
10" SPEAKERS
P-10R AlNiCo
SOLD
"Blue Frame"
FOR SALE
Need to re-speaker that old Tweed '55-'60 Bassman, or other guitar amp with some originals
then here you go. Original Blue AlNiCo Magnet Jensen 10"-16 ohm
speakers, series P-10R date code 220844 (44th week of 1958). They look, work
and sound great! With the exception of some minor finish chips on one of the
frames (see photos) there are no dents, tears, gouges, rust or anything.
Original paper cones and surrounds perfect as are the original mounting
gaskets! Ready to install. The above 1958 Jensen P10R 's are
original speakers. Here's the specs from the new re-issues which are
comparable. 16 ohms, 25 W RMS, 50 W peak, 80-6kHz Freq response, 1"
voice coil, 95 dB @ 1watt / 1 meter. Both
passed our audio generator sweep test and are ready to install.
These are perfect for an old Tweed
Fender 4x10 Bassman.
Jensen P-10R P10R
Cond. 9
SOLD |
PAIR ORIGINAL VINTAGE
1959
JENSEN
15" SPEAKERS
P15N AlNiCo
"Blue Frame"
SOLD 2/18/04
FOR SALE
Beautiful condition Jensen 15" AlNiCo magnet, "N" series
(Top of the line in the Concert Series) "Blue Frame"
bass / guitar speakers. 1 1/2" voice coil versions. Look and sound
great. Date codes are 220926 (26nd week of 1959) on both drivers. Original
paper cones, dust caps, mounting gaskets and surrounds perfect! Measure 8
ohms each. Both passed our audio generator sweep test and are ready to
install. Ready to drop in that old Fender, Gibson, Ampeg or other amp.
Jensen P15N P15-N
Cond. 8.5
SOLD 2/18/04 |
PAIR ORIGINAL VINTAGE
1958
JENSEN
12" SPEAKERS
P-12R AlNiCo PM
Special Design
SOLD
Need to re-speaker that old Fender or other guitar amp with some originals
then here you go. Original Blue AlNiCo Magnet Jensen 12"-8 ohm speakers,
series P-12R date code 220846 (46th week of 1958). (We know the 1958 and not
68 by dating the Hi-Fi unit they came from). They look, work and sound
great! No dents, tears, gouges, rust or anything. Ready to install.
Recommended for not more that 20-25 watts each.
Jensen P-12R
Cond. 9.5
SOLD |
ORIGINAL VINTAGE
1967
JENSEN
12" SPEAKER
W120 AlNiCo
"Brown Frame"
SOLD |
ORIGINAL VINTAGE
1959 or 1969
Jensen
"Special Design"
8" SPEAKER
P8S AlNiCo P8-S
SOLD
Original AlNiCo Magnet 8"-8 ohm speaker, mfg / date code 220908 (8th week of
1959 or 69). "S" was the top of the Standard line. Looks and sounds great.
Original cone, surround, dust cap and mounting gasket in great condition.
Passed our audio generator sweep test and is ready to install.
Cond. 9.5
SOLD |
PAIR ORIGINAL VINTAGE
1958
JENSEN
"Capehart"
12" SPEAKERS
P12R AlNiCo PM P12-R
SOLD
Need to re-speaker that old Fender or
other guitar amp with some originals then here you go. Original coned Silver
AlNiCo Magnet Jensen 12"-8 ohm speakers, series P12R date code 220112 (12th
week of 1961) & 220243 (43rd week of 1962). They look decent, work and sound
great! No dents, tears, gouges, just some light rust on the frame of one.
Ready to install. Both passed our audio generator sweep test and are ready
to install. 1" voice coils so recommended for 15-25 watts. 8 ohms.
Jensen P-12R
Cond. 8
SOLD |
1958 JENSEN P12R BLUE-BELL GUITAR
SPEAKER
SOLD |
'67 JENSEN C12 N GUITAR SPEAKER
SOLD |
MAGNATONE 3HGA MOTHER OF TOILET SEAT
TUBE GUITAR AMP
SOLD
|
MARSHALL
GUITAR AMP
G30R-CD
SOLD
Great compact gig / practice amp. HUGE sound and BIG gain! Twin channels
with reverb. Also has CD / Tape input for rehearsal. Channels can be
switched using the front panel selector switch or via the 1/4" footswitch
jack using any "latched" footswitch (not included). Each channel has it's
own EQ with channel two having a 3 band EQ. Channel two also a separate gain
and master volume. The reverb works on both channels and is infinitely
adjustable. Additionally there is a 1/4" stereo headphone output for private
"jamm'in" and a 1/4" line-out for recording, feeding another amp or going
straight into the PA system. The speaker is the factory 10" MARSHALL MG
Custom Loudspeaker. Amplifier produces a strong 30 Watts @ 4 ohms! The unit
is very clean with only a minor tear in the side of the Tolex covering where
an adhesive holder was attached (see photo). Everything works great! We have
completely gone through it cleaning all contacts, jacks, controls and pots.
Fully tested and sounds great! Measures 19" wide x 16" tall x 9" deep and
weighs 24 lbs unpacked. Includes our standard 90 day limited warranty.
Cond. 8.5
SOLD
|
(click on above thumbnails to enlarge photos)
EARLY '80'S MARSHALL JCM-800 / 4010 1X12" COMBO ALL TUBE
50 WATT GUITAR AMPLIFIER
Circa early '80's
SOLD 9/30/05
TONE - TONE - TONE !!!
Marshall JCM-800 / 4010 all tube guitar amp. This is an incredible sounding
and performing amp. Everything from decently clean, to "bitey" blues to that
famous Marshall crunch. This is an amp you play, not just play through!
There aren't many amps you can say that about. Controls are Pre gain, Master
volume, Bass, Mid, Treb and Presence. Has vertical inputs with both Hi and
Lo level jacks. Output is selectable for 4, 8 or 16 ohm loads. AC input
voltage is "World AC Power" as it will run on 120-240 volts. Dual 6550
outputs and 12AX7 pre-amp tubes for 50 watts of output power. Internal
speaker is a Rola / Celestion 12-65 for great tone. I tried it with a
generic 4 x 12 cab and am not sure I don't like the tone and drive of the
internal speaker just as well, if not better. Amp is in great shape with
little cosmetic wear. Measures 23" w x 20" tall x 10" deep and weighs 51 lbs
unpacked.
Cond. 8.5
SOLD 9/30/05
OH MAN, I SHOULD HAVE KEPT IT!!!
|
MASCO MODEL MU-5 TUBE GUITAR / LAP
STEEL AMP.
CIRCA PROBABLY EARLY '50'S.
SOLD |
'81
MESA BOOGIE MARK II C + TUBE GUITAR AMPLIFIER.
ONE OF THE EARLY ONES! MADE OF SOLID AFRICAN IMBUYA WOOD!
SOLD |
OAHU / VALCO TUBE GUITAR AMPLFIER
ALL TUBE, OF COURSE.
SOLD
|
PARK PR-10 GUITAR AMP
SOLD
|
|
|
SILVERTONE "TWIN-TWELVE" MODEL
1484 TUBE GUITAR AMP HEAD
DAN ELECTRO BUILT
SOLD
|
SILVERTONE "TWIN-TWELVE" MODEL 1484 TUBE
GUITAR AMP HEAD
DAN ELECTRO BUILT (#2)
SOLD
|
SILVERTONE "TWIN-TWELVE" MODEL 1484 TUBE
GUITAR AMP HEAD
DAN ELECTRO BUILT(#3)
GUITAR HEAD
CIRCA 1964
SOLD
|
'51 SILVERTONE GUITAR AMP MODEL 1340
SOLD |
SILVERTONE MODEL 1431 TUBE GUITAR AMP
Late 50's Early 60's
Great little tube amp. Durable and simple design featuring point-to-point
hand wiring. The way amps used to be. 8" speaker appears to be the original
and is in great shape. Tube compliment is 6X5GT (rectifier), 6AU6 (pre-amp)
and 6V6GT (output). We have gone through the amp completely cleaning all
pots, jacks and tube sockets. All tubes and caps have been checked and / or
replaced where necessary. Amp looks great with only minor wear to edge of
speaker grill, visible in photos. Looks and sounds great! Some nice tube
gain when you stand on the volume. Sounds like a "Champ". Literally.
Measures 14.5" tall x 17" wide x 8.5" deep and weighs 12lbs unpacked.
Cond. 8
SOLD
|
STROMBERG CARLSON NO. 33 TUBE AMPLIFIER
SOLD |
THD 410 PLEXI REVERB 'TWEED BASSMAN'
TUBE GUITAR AMPLIFIER
SOLD |
VALCO MADE NATIONAL TUBE GUITAR / LAP
STEEL AMPLFIER
CIRCA 1948
SOLD |
(click on above thumbnails to enlarge photos)
USED
VINTAGE UNIVOX U150R SOLID STATE GUITAR AMP
Circa late 60's early 70's
SOLD 11/14/03
Kinda' cool vintage Univox dual
10" speaker guitar amp with reverb, tremolo and 3 inputs. Sounds pretty darn
good too! Plays clean for the most part. No built-in overdrive which makes
it great for use with a pedal or effects unit. We have used it this way at a
gig with great results. Fitted with a vintage style "medium-size" reverb
tank for great sounding "Surf" tones. Tremolo sounds fabulous. Bass, Mid and
treble controls on EQ. Back panel features 1/4" jacks for footswitch
operation of the reverb and tremolo (footswitches not included but any
standard "latched" pedals will work). Features twin 10" 4 ohm, 30 watt
speakers stamped UNIVOX so they are the originals. We have completely gone
through it cleaning all the pots and contacts. We also tightened everything
up inside and out, installed a new AC cord and new speaker wires. It works
and sounds great! Still looks pretty good with normal wear to finish and
some staining to original speaker grill. Great Country or Surf amp! Around
25-30 watts output. Measures 28.5" tall x 18" wide x 8.5" deep and weighs 32
lbs unpacked. Includes our standard 90 day limited warranty (excluding
speakers which are guaranteed to work at time of delivery).
UNIVOX U150R
Cond. 7
SOLD 11/14/03
|
UNKNOWN
LATE 30'S VERY EARLY 40'S
GIBSON / MAGNATONE LIKE TWEED AMP.
SOLD
|
ORIGINAL VOX MODEL V1011 "PATHFINDER"
GUITAR AMPLIFIER
NOT A RE-ISSUE!
SOLD |
WOW!!!
ORIGINAL WESTERN ELECTRIC 754A 12" SPEAKERS MATCHED PAIR!!!
SOLD
|
(click on above thumbnails to enlarge photos)
VINTAGE
MAHOGANY
12" SPEAKER CABINET. GREAT FOR A 'VINTAGE VIBE' GUITAR AMP.
SOLD 4/15/04
Great way to set yourself apart from other guitar players on stage.
Definitely NOT digital or MIDI ! Can fit any 12 inch speaker. We've used it
for testing various 12" drivers for sound quality. Currently 2/3 open back
but could be closed. Beautiful Mahogany veneered solid wood cabinet with
finish still in pretty good shape. No cracks, breaks or chips. Original
vintage Oxblood weave speaker grill in perfect shape. No rattles or buzzes
when played loud. Looks similar to a little Leslie Organ speaker. Very Cool
stage accessory. Measures 21.25" tall x 16.25" wide x 11" deep.
Cond. 8
SOLD 4/15/04 |
(click on above thumbnails to enlarge photos)
VERY RETRO
VINTAGE
BLONDE OAK
12" SPEAKER CABINETS
GREAT FOR A 'VINTAGE VIBE' GUITAR AMP.
SOLD
12/20/04
Very Retro look especially when married with an Speedster or Tone King
Guitar Amplifier. Load with your favorite 12" drivers. Cabinets are in good
condition with normal finish checking. The Oak Wood grain varies slightly
one from the other, but this is hard to notice unless you look very closely.
The cloth grills are in good shape with only minimal snags. There are also a
couple of tweeters already installed if you're interested. Could be used
with existing Masonite back, left open or have back replaced with another.
The bottoms of the cabinets are currently open. The tapered legs unscrew if
needed. Each measures 28" tall x 18" wide x 14" deep and weigh 21 lbs
unloaded and unpacked.
Cond. 8
Columbia Blond Oak Cabs
(unloaded)
SOLD 12/20/04
|
|
|
|
|
|
|